clamcleat.com uses cookies to ensure we give you the best experience on our website. By navigating our site, you agree to allow us to use cookies, in accordance with our Privacy Policy
PT418 Clamp for semi-buried rubbish containers
Containers have a solid lid at the bottom. The PT418 will help to allow lid to fall open.
| Technical Details | Metric | Imperial | |
|---|---|---|---|
| Rope Diameter |  |
10mm | 3/8" |
| Material |  |
Nylon | Nylon |
| Hole Centres |  |
71mm | 2 13/16" |
| Length |  |
280mm | 11" |
| Width |  |
101mm | 3 31/32" |
| Height |  |
93mm | 3 11/16 |
| Bolt Size |  |
M6 | 1/4" |
| Screw Size |  |
n/a | N/A |
| Weight |  |
730gms | 1lb 10oz |
Availability:
In stock
SKU
Clamcleat-PT418
For use on recycling and refuse containers that have a hinged solid lid at the bottom. The Clamcleat® PT418 helps to hold the lid firmly closed. Removing the safety pin and pulling on the release rope allows the lid to fall open.
See the [Downloads] tab for leaflets and technical details. If you are machining the fixing holes, we have a DXF file available. Please Contact Us.
Our PT414-9 rope is an ideal release rope for PT418 Clamp. Tie the rope onto handle of PT418 clamp so you can pull the handle from a distance. To make easier for the operator to hold the rope, either - 1: Tie a figure-of-8-knots along the rope, or 2: Tie a "handle" in the rope.
For flexible bags, that are tied at the bottom, see CL279 cleat for holding the closing rope.
Write Your Own Review
Q: Do Clamcleat® make a clamp for bottom lid on recycling bags?
Ans: The PT418 is designed as a clamp for the bottom lid on recycling bags.
Q: Does Clamcleat® make products for semi-buried recycling bag systems or deep collection containers?
Ans: There is a range of products made by Clamcleat® for recycling bag systems which include CL279 cleat, PT406 loops, PT414-9 rope, PT413-1 tube assembly, PT416-1 tube assembly and PT417-1 tube assembly.
