CL708 Rivet-on Fitting for 6:1 Ratio

Be the first to review this product

CL708 is usually used with CL248

Technical Details	Metric	Imperial
Rope Diameter	3 -5mm	1/8 - 3/16"
Material	Aluminium & Nylon	Aluminium & Nylon
Hole Centres	11 & 29mm	11/16 + 1 1/8"
Length	83mm	3 1/4"
Width	37mm	1 7/16"
Height	24mm	15/16
Bolt Size	4.8	#10-24. 3/16"
Screw Size	N/A	No 10
Weight	32gms	1.1oz

Availability:

In stock

SKU

Clamcleat-CL708

Details

Clamcleat® CL708 is usually used with CL248 to give a 6:1 advantage with 3-5mm ropes. Fixes to windsurf masts or tubes about 50mm (2") diameter. The CL708 is manufactured from high pressure die-cast aluminium to give a strong, light weight and durable part. The rollers are manufactured from a composite plastic designed to withstand coral sand.

The CL248 hooks onto a sail to make the perfect companion to the CL708

Reviews

Write Your Own Review

Q: Does Clamcleat® make cleats for windsurfers?

Ans: Clamcleat® make a range of cleats for windsurfers including CL247 twin sheave cleat, CL248 cleat with hook and 3 sheaves, CL250 gap closer, CL253 trapeze cleat, CL708 Rivet-on fitting for 8:1 cleat and a range of boom cleat and clamp for booms from 20-43mm.

Q: What size of rope can you use on the CL708?

Ans: The CL708 will accept ropes from 3-5mm.

Q: How long should an Aluminum cleat last?

Ans: This really depends on the usage, the quality and age of the rope used etc. so is very difficult to gauge. The ultraviolet rays will discolor the cleats over time and in very sunny climates may affect the life of the cleat. In extreme climates the life expectancy should be 10 -15 years depending on usage and in more moderate climate 20 + years.

Q: What type of rope or cord will give the best performance on my cleats?

Ans: In our experience a braided good quality rope gives you the best holding performance.

Q: Is there any maintenance required to a cleat to keep it performing well?

Ans: We would recommend flushing the with fresh water as often are you can.