CL244/L Aluminium Cleat Insert with Fairlead

Q: Does Clamcleat® make a replacement cleat for the CL244/R?

Ans: The replacement cleat for the CL244/R is the CL244/L.

Q: What size of rope should I use on my CL244/R cleat?

Ans: The size of rope used on the CL244/R is from 6mm.

Q: Does Clamcleat® make cleats for windsurfers?

Ans: Clamcleat® make a range of cleats for windsurfers including CL247 twin sheave cleat, CL248 cleat with hook and 3 sheaves, CL250 gap closer, CL253 trapeze cleat, CL708 Rivet-on fitting for 8:1 cleat and a range of boom cleat and clamp for booms from 20-43mm.

Q: What diameter of boom will the boom CL244 Boom cleat fit?

Ans: CL243/S5 = 20-21mm tube

CL244+CL105 = 30-32mm tube

CL244+CL111 = 32-35mm tube

CL244+CL115 = 35-37mm tube

CL244+CL134 = 42-43mm rube

CL265AN with stainless steel clamp = 25-31mm

Q: What can I use to tension my outhaul or downhaul?

Ans: Clamcleat® make a range of power grip cleats for hand tensioning the outhaul or downhaul. The power cleats include CL249 Tug cleat, CL261 power grip 1 (single hand) and the CL262 power grip 2 (two handed cleat) all for 3-6mm rope.

Q: Why does Clamcleat® not publish safe working loads (SWL) or break loads for its cleats?

Ans: The quality, type and style of the rope or cord plays a major role in the performance of the cleat. Normally the better the quality of the rope the greater holding power, also some cleats are designed to slip once they exceed the desired holding load as a safety feature including securing fabrics such as sunshades or covers.

Q: Do you get a better performance with an Aluminum cleat?

Ans: Aluminum cleats do not improve the performance of the cleat, but they can achieve higher holding loads and they also might improve the lifespan of the cleat especially if the rope will be in contact with the teeth whilst the rope is being pulled through during adjustment.

Q: What different coating are there for the Aluminum cleats?

Ans: The standard coating for the cleat is a Stoving Aluminum silver enamel coating. For extra protection from corrosion and a high-tech appearance the cleats are also available in a dark grey Hard anodized finish. The part no in suffixed with “AN” to identify the hard anodized finish.

Q: How long should an Aluminum cleat last?

Ans: This really depends on the usage, the quality and age of the rope used etc. so is very difficult to gauge. The ultraviolet rays will discolor the cleats over time and in very sunny climates may affect the life of the cleat. In extreme climates the life expectancy should be 10 -15 years depending on usage and in more moderate climate 20 + years.

Q: What type of rope or cord will give the best performance on my cleats?

Ans: In our experience a braided good quality rope gives you the best holding performance.

Q: Is there any maintenance required to a cleat to keep it performing well?

Ans: We would recommend flushing the with fresh water as often are you can