The store will not work correctly when cookies are disabled.
clamcleat.com uses cookies to ensure we give you the best experience on our website. By navigating our site, you agree to allow us to use cookies, in accordance with our Privacy Policy
The IODA by Birdyfish, manufactured in France, is a 3.2m single-person dinghy that foils at just 8 knots. It uses our CL211Mk1 to adjust the kicker, the CL222 for the tiller downhaul, and the CL211Mk2/S2 for the main outhaul.
REDBOOT from Argentina designs and handcrafts orthopaedic boots that support the recovery of foals and horses suffering from limb deformities, fractures, and even amputations. Each boot is built on veterinary expertise, biomechanical knowledge, and a deep understanding of equine anatomy with skilled craftsmanship in Argentina. The CL211Mk2 cleat is designed to keep the articulated full limb brace in the correct position or angle while keeping the leg as straight as possible. For more information about REDBOOT, please visit www.redboot.com.ar.
The CL211 Mk2AN can be used with the CL815 keeper which allows the rope to run freely when out of the cleat and keeps it engaged when the rope is engaged . Ideal for spinnaker halyards and applications when you have a fast hoist or drop. For more information visit clamcleat.com.
The Clamcleat® CL835 is designed to guide the rope from inside the tube to the outside, cleating with either Aluminium CL211 Mk2 or Nylon CL272 cleats. It's ideal for use with sunshades and flag poles. The sheave prevents the rope from touching the fixings, allowing it to travel in the same direction as the cleat or at 180 degrees. The plate housing ensures a neat finish, even if the hole cut in the tube is slightly oversized. Simply follow the provided cutting diagram. This device fits tubes ranging from 30 to 150mm in diameter.
