The store will not work correctly when cookies are disabled.
clamcleat.com uses cookies to ensure we give you the best experience on our website. By navigating our site, you agree to allow us to use cookies, in accordance with our Privacy Policy
Enchanted Bell Tents contacted us recently because they were having problems maintaining the tension on their glamping tent guylines when using traditional wooden bars. The 80 tents which are rented out normally between 2 to 7 days at a time, required regular visits to the venue to ensure the guylines were tensioned. We recommended the CL276 in white for 3-6mm guyline, which resolved their issue immediately as the Line-lok® are very easy to rig and secure, holding the tension permanently. The Line-lok® are also available in six standard colours, maintaining the luxury feel they wanted. The Line-lok® cleats come in four sizes: CL266 for 1-3mm guyline, CL260 for 2-5mm, CL276 for 3-6mm, and CL271 for 4-8mm. All are available in black, white, NATO green, light grey, khaki, and glow-in-the-dark.
The Chok-A-Blok™ CAB35 and CAB50 strap guards from Clamcleats Ltd protect both the boat and the webbing strap when strapping down your boat. They safeguard delicate surfaces like varnished wood and gel coat when loaded onto trailers or trucks. Key features include holding all types of webbing strap, CAB35 from 25-35mm (1" - 1 1/2") wide and CAB50 from 35-50mm (1 1/2" - 2"). They clip easily onto the webbing strap, are lightweight and stay in place during strap positioning. They can slide along the strap to the point of contact and additional units can be added to extend coverage. The foam's closed cell structure resists solid debris, is easy to clean and avoids damage to gel coats and varnish. The foam does not soak up moisture, preventing water marks on polished surfaces. As tension is applied to the strap, frictional damage to the cargo surface is eliminated because the strap slips easily across the polypropylene top surface. The clips hold the Chok-A-Blok™ onto the webbing, so it stays in place and can be left on loose strapping without getting lost.
Soliday Sunsails, from Plaspack Netze GmbH in Austria, uses CL217Mk2 on its manual retractable awnings. It's a great way to make the most of your outdoor space in this ever-changing climate. The sails can cover up to 36m2 and are available in a large range of colours, both as protection from the sun and in waterproof fabric. The sails are guided on rails or wire, and the CL217Mk2 allows you to manually adjust the sail position simply and easily with very little effort. Soliday also uses several other Clamcleat® rope cleat products on its range of sunsails, including the CL257 Auto-release cleat, CL223 Loop cleat, CL204 Open cleat, and CL261 Power Grip. For more information, visit soliday.eu.
The Clamcleat® CL285 is designed for higher load applications and accommodates ropes with a diameter of 4-6mm. This all-aluminium lightweight cleat is easy to install and adjust, making it ideal for heavy-duty kitesurf brake lines. The cleat position on the rope can be easily adjusted by hand, no tools necessary. Additionally, it's perfect for handling higher loads on guy lines for tents, canvas structures, radio masts and aerials.
By attaching a single block to the rear fixing point of the CL230AN, this has created a 3:1 tensioning system. A clever, compact, and inexpensive solution. The CL230 Mk1 with bottom roller is part of the Roller cleat range and is ideal for use in tensioning halyards, sun sails, and shades. It can be used with ropes from 3 to 6mm.
The Clamcleat® CL835 is designed to guide the rope from inside the tube to the outside, cleating with either Aluminium CL211 Mk2 or Nylon CL272 cleats. It's ideal for use with sunshades and flag poles. The sheave prevents the rope from touching the fixings, allowing it to travel in the same direction as the cleat or at 180 degrees. The plate housing ensures a neat finish, even if the hole cut in the tube is slightly oversized. Simply follow the provided cutting diagram. This device fits tubes ranging from 30 to 150mm in diameter.
The Chok-A-Blok™ CAB35 & CAB50 strap guards protects both the cargo and the webbing strap when you are strapping down the load. They protect delicate surfaces, such as varnished wood and gel coat, when loaded onto trailers or trucks.
Key features of the strap guard
• Holds all types of webbing strap, CAB35 from 25-35mm (1" - 11/2") wide and CAB50 from 35-50mm (11/2" - 2").
• Clips easily onto the webbing strap.
• It is light weight and stays in place on the strap throughout the important stage of strap positioning.
• It can easily be slid along the strap to the point of contact.
• Additional units can be added to extend the area of coverage.
• Because the foam has a closed cell structure it is resistant to the ingress of solid debris. It is easy to keep clean and avoids damage to gel coats, varnish etc. The foam does not soak up moisture, so you don't get water marks on the polished surfaces.
• As tension is applied to the strap, frictional damage to the surface of the cargo is eliminated because the strap is allowed to slip easily across the polypropylene top surface.
• The clips hold the Chok-A-Blok™ onto loose webbing, so they can be left on loose strapping preventing them from getting lost and stay in place for next time.
